3. Assembly
3. Seat assembly
You can install the seat both forward-facing and rear-facing.
Assemble it to the direction according to time and preference.
As shown in the picture left, assemble the insertion area and seat
connection area located both sides of the frame to fit exactly with
each other.
When separating seat, press seat release button located on the
upper part of both sides of the assembled seat simultaneously and
pull upward and separate.
Make sure to check if brake is locked before seat assembly.
Be careful not to put your finger in the connecting area when
assembling the seat.
4. Safety guard / canopy assembly
To maximize the safety of the child, safety guard is installed in addition to the seat belt. Safety guard
is installed by inserting guard release button into guard holder ②. Guard release button in opposite
side can be installed by same manner by rotating same direction as arrow ③.
Make sure safety guard is installed correctly before use.
Canopy installation can be done by
connecting shade release button ①
to the shade holder ② as shown on
the picture in left.
Please pay attention not to put your hand in the gap when installing safety guard.
In case angles of the canopy release button on both sides are different, install the
canopy after checking “Other instructions” in page 12.
Attention
Attention
