reservoir and float switch mechanism. To re
duce “hammering” of solenoid valve,
needle valve can be adjusted to reduce incoming water pressure to solenoid.
Needle valve is located at inlet of solenoid valve.
Lights
The lights are coated incandescent bulbs and must be replaced with exact
equivalent bulbs. (60 Watt Maximum)
ELECTRICAL INFORMATION &
GROUNDING
This Case Must Be Grounded
All case electrical connections must be performed only by a licensed electrician.
All electrical wiring hookups must be done in accordance with all applicable local,
regional, or national electrical standards.
A separate circuit for each display case is recommended to prevent other appliances on
the same circuit from overloading the circuit and causing malfunction.
The electrical service must be grounded upon installation.
This unit is designed for permanent connection to a power source. See the electrical
data plate located next to electrical junction box for proper circuit size and wire
ampacity.
The electrical field connection 2 x 4 box is accessible from the rear of the case and is
located in the right “leg” (as viewed from case rear). A second 2 x 4 field connection
box is also located in the right leg and is required to supply electrical power to the
general purpose receptacle.
Market Deli Heated Cases
Page 5
DANGER: Improper or faulty hookup of electrical components in
the display case can result in serve injury or death.
