manualshive.com logo in svg
background image

5

Safety Messages

Installation Manual 
Federal Signal www.fedsig.com

•  If future service and operating personnel do not have these instructions to refer 

to, the siren system may not provide the intended audible warning, and service 

personnel may be exposed to hazards that could result in death, permanent hearing 

loss, or other bodily injuries. File these instructions in a safe place and refer to them 

periodically. Give a copy of these instructions to recruits and trainees. Also give a 

copy to anyone who is going to service or repair the siren.

Installation and Service

•  Electrocution or severe personal injury can occur when performing various 

installation and service functions such as making electrical connections, drilling 

holes, or lifting equipment. Therefore, only experienced electricians should install this 

product per national, state, and any other electrical codes having jurisdiction. Perform 

all work under the direction of the installation or service crew safety foreman.

•  The sound output of sirens is capable of causing permanent hearing damage. To 

prevent excessive exposure, carefully plan siren placement, post warnings, and 

restrict access to areas near the sirens. Sirens may be operated from remote control 

points. Whenever possible, disconnect all siren power, including batteries, before 

working near the siren.

•  After installation, service, or maintenance, test the siren system to confirm it is 

operating properly. Test the system regularly to confirm that it will be operational in 

an emergency.

•  If future service and operating personnel do not have these warnings and all other 

instructions shipped with the equipment to refer to, the siren system may not provide 

the intended audible warning, and service personnel may be exposed to hazards 

that could result in death, permanent hearing loss, or other bodily injuries. File these 

instructions in a safe place and refer to them periodically. Give a copy of these 

instructions to recruits and trainees. Also give a copy to anyone who is going to 

service or repair the sirens. 

Operation

Failure to understand the capabilities and limitations of your siren system could result 

in permanent hearing loss, other serious injuries, or death to persons too close to 

the sirens when you activate them or to those you need to warn. Carefully read and 

thoroughly understand all safety notices in this manual and all operations-related items in 

all instruction manuals shipped with the equipment. Thoroughly discuss all contingency 

plans with those responsible for warning people in your community, company, or 

jurisdiction.

Read and understand the information contained in this manual before attempting 

to install or service the siren.

Pay careful attention to the notice located on the equipment.

Содержание YAGI-1



















Отзывы: