Installation and Maintenance Instructions
5
Models VSLR1 and VSLR1-IPX
Figure 3 Wiring for Models VSLR1 and VSLR1-IPX
290A6950
RED
BLACK
RED
INSULATED BUTT
CONNECTORS
(INSTALLER SUPPLIED)
8 A
FUSE
(+) TO POWER
SOURCE
(−) TO GROUND
BLACK
RED
SWITCH
Cleaning the Plastic Dome
CRAZING/CLEANING SOLUTIONS—The use of other materials such as strong
detergents, solvents, petroleum products, etc. can cause crazing (cracking) of the
plastic domes. If crazing of domes does occur, reliability of light for emergency
purposes may be reduced until domes are replaced. Failure to follow this warning
can damage the domes, reducing the effectiveness of the lighting system, and may
result in injury or death.
CRAZING/CHEMICALS—Crazed, cracked or faded domes reduce the light output and
the effectiveness of the lighting system. Domes or reflectors showing this type of
aging must be replaced. Failure to follow this warning may result in injury or death.
To clean the dome:
1.
Rinse the dome with lukewarm water to loosen dirt and debris.
2.
Use a mild detergent, lukewarm water, and a soft cloth to gently clean the dome. To avoid damaging the
finish, do not use heavy pressure or caustic, abrasive, or petroleum-based cleaners.
3.
Rinse and dry the dome with a soft cloth to prevent water spotting.
4.
To remove fine scratches and haze, use a soft cloth and a high quality automotive paste cleaner/wax that
is non-abrasive or a plastic polish like Plexus
®