9
Installing the Viper EXT Series LED Light Heads
7. Route the wires from the module through the hole in the gasket and mount-
INGSURFACE
Figure 1
5SEGROMMETSWIRETIESLOOMSANDCABLEMOUNTS
NOTSUPPLIED ASNEEDEDTOSECUREANDPROTECTTHEWIRING
Figure 1: Mounting the
V
IPER
EXT
from the front
0LACETHEMOUNTINGBEZELOVERTHEMODULEANDSECUREITTOTHEMOUNTING
SURFACEWITHTHESHEETMETALSCREWSPROVIDED
Mounting the
V
IPER
EXT
to a Vehicle from the Back
ROOF SUPPORT STRUCTURE
There is a roof support member that spans the distance between the driver’s
and passenger’s side. DO NOT DRILL THROUGH THIS MEMBER! Ad-
just any hole locations until the holes can be drilled without going through
this support.
Failure to follow this warning will weaken the roof of the vehicle and may
lead to an increased chance of bodily injury or death in a roll over accident.
LOCATING OPERATOR CONTROLS
Locate the light system controls so the VEHICLE and CONTROLS can be
operates safely under all driving conditions.
Failure to heed this warning could result in driver distraction or driver er-
ror while operating the vehicle.
GASKET
V
IPER
EXT
LED
LIGHT HEAD
MOUNTING BEZEL
#10 SCREWS