-2-
SECTION II
SPECIFICATIONS
A.
GENERAL.
Input Voltage ..................................................... 11VDC to 15VDC.
Polarity
............................................................ Negative ground only.
Operating Temperature Range ......................... -30
°
C to +65
°
C.
Standby Current ................................................ Less than .5 ampere
Dimensions:
Amplifier/SignalMaster Control/Relay Unit
Height ................................................. 3-1/8"
Width .................................................. 6-3/8" (16.2cm)
Length ................................................ 6-1/4" (15.9cm)
Net Weight ......................................... 3-3/4 lbs. (1.704kg).
Control Head
Height ................................................. 3-1/8" (5.87cm).
Width .................................................. 1.25" (3.18cm).
Length ................................................ 6-3/4" (17.15cm).
Net Weight ......................................... 9-5/8 oz. (0.273kg).
Shipping Weight ................................................ 6.8 lbs. (3.09kg).
B.
LOAD MANAGEMENT SPECIFICATIONS.
High Idle Output ............................................... +BAT, 2A max.
Default Voltage Threshold ................................ 12.8VDC, 11.8VDC, 11.0VDC,
(13.8VDC, 12.8VDC, 11.8VDC selectable).
Load Shedding Interval ..................................... 30 seconds.
Adjustable Voltage Threshold Range ............... 11 - 15VDC.
C.
SIREN SPECIFICATIONS.
Operating Current ............................................. 9 amperes (nominal).
(no lamps on)
(13.6V battery, 11 ohm load @ high power)
Frequency Range ............................................... 725 to 1600Hz.
Nominal Cycle Rate ........................................... Wail - 12 cycles/min.
Yelp - 180 cycles/min.
Hi-Lo- 60 cycles/min.
Nominal Voltage Output ................................... 64V peak to peak (siren tones).
Audio Response .................................................. 300Hz to 3,000Hz
±
3db.
Audio Power ....................................................... 45 watts in PA Mode (typical with 1.4V peak to peak input).
Harmonic Distortion .......................................... Less than 10% from 5 to 45 watts.
Input Impedance (PA) ....................................... 4000 ohms (nominal).
D.
SIGNALMASTER SPECIFICATIONS.
Fuse
............................................................ 25 amperes (Halogen and LED)
7.5 amperes (Cuda TriOptic™ , 6 and 8 module)
Output Drive
Capability (Total) ............................................... 8,27 watt lamps
Normal Flash Rate
Directional ................................................. 35 patterns/min.
Warn ........................................................... 60 patterns/min.
Fast Flash Rate
Directional ................................................. 60 patterns/min.
Warn ........................................................... 95 patterns/min.
