Federal Signal Corporation Premium Vision, Инструкции по эксплуатации и настройке

Страница: 13 / 24

LEVEL 2 - KEYS
GENERAL
In LEVEL 2 - KEYS you can assign
many different functions to a key/switch.
Each key can control:
• A Pattern.
• A SignalMaster Pattern.
• Any combination of relays.
• Key Functionality.
• Steady Red Enable.
• Horn Ring Transfer Enable.
Once the key is configured, press SAVE
to return to LEVEL 2.
RED ENABLE
Press key 17 to enable the steady red
pod(s) with the key being configured.
DO NOT use this option with pattern 32.
PATTERN NUMBER
To select a pattern number, press keys
10 through 16 (labeled above as 2
through 8 for convenience) to create
the number cross referenced to the
chart on the last page of WORKSHEET.
If a pattern already exists, press any
key labeled above as 2 through 8 to
clear the pattern.
Press the tens digit number. (Key dis-
play on bottom row will be solid for tens
digit.)
Press the ones digit number. (Key dis-
play on bottom row will be blinking for
ones digit.)
SIGNALMASTER
Press key 18, SignalMaster Select, until
the desired SignalMaster pattern ap-
pears on the SignalMaster display. (Two
LED’s bouncing back and forth signi-
fies the SignalMaster step through func-
tion.)
RELAYS
Press key 19 (RELAY SELECT) until
the needed combination of relays are
selected. The relays being selected are
displayed on the left four LED’s of the
“V-Display”.
BUTTON FUNCTION
Press key 20 (BUTTON FUNCTION)
until the needed function is selected.
The function is displayed on the right
three LED’s of the “V-Display”.
No LED’s = Push-On/Push-Off,
M = Momentary, T = 8-second Timeout,
S = Security Timeout.
HORN RING TRANSFER
Press key 9 to enable Horn Ring Trans-
fer with the key being configured (can
only be configured into bottom row of
keys).
2-5