3
Installation Instructions for MicroPulse Mounting Kit
MPSM6-LPV2 Adjustable Mounting Kit
Federal Signal www.fedsig.com
Safety Message to Installers of Warning Light Equipment
People’s lives depend on your proper installation and servicing of
Federal Signal products. It is important to read and follow all instructions
shipped with this product and the original product. In addition, listed
below are some other important safety instructions and precautions you
should follow:
• To properly install the lighting system, you must have a good
understanding of automotive systems, along with proficiency in the
installation and use of safety warning equipment.
• Do not install equipment or route wiring in the deployment path of an
airbag.
• If a vehicle seat is temporarily removed, verify with the vehicle
manufacturer if the seat needs to be recalibrated for proper airbag
deployment.
• You should frequently inspect the light system to ensure that it is
operating properly and that it is securely attached to the vehicle.
• When drilling into a vehicle structure, be sure that both sides of the
surface are clear of anything that could be damaged.
• Refer to the instructions packed with related products for additional
precautions and information.
• File these instructions in a safe place and refer to them when
maintaining and/or reinstalling the product.
• Do not stare directly into the lights at a close range, or permanent
damage to your eyesight may occur.
Failure to follow all safety precautions and instructions may result in
property damage, serious injury, or death.
