10
Specifications
Modulator High Powered Omni Speaker (Model MOD Series)
Federal Signal www.fedsig.com
Ordering Information
Contact our Federal Signal sales engineers to design a system that meets your specific
requirements. Specify a speaker array model number. Each speaker array model must be
ordered with a specific corresponding UV and amplifier.
Table 2 Ordering Information
Speaker
Controller
1
MOD1004B
2
UV + 1 UV400
MOD2008B
2
UV + 2 UV400
MOD3012B
2
UV + 3 UV400
MOD4016B
2
UV + 4 UV400
MOD5020B
2
UV + 5 UV400
MOD6024B
2
UV + 6 UV400
MOD6032B
2
UV + 8 UV400
MOD8032B
2
UV + 8 UV400
1
Controllers available in radio, IP, and landline.
2
Add the letter C to the Modulator model name for Steel/Concrete pole mount model.
NOTE: For the standard cable length supplied with the siren, see “Table 13 Number
of Wires and Cable Length per Module” on page 20. The extension cable is also
available in 10-foot increments. Mounting the UV controller farther than 100 feet is not
recommended. (Farther mounting may decrease the power output.)
Specifications
Table 3 General Specifications
Color
Weather Guard White III
Paint Type
TGIC Polyester Powder Coat
Modular Horn Type
Hyperbolic Flare
Frequency Response
200-2000 Hz
Horizontal Coverage
360 Degrees
Bottom (non-active) Module* Dimensions 13-1/2 x 35 inches Diameter
Input Voltage
66 V
RMS
min., 400 W max.
* The bottom module of the siren is a passive device that does not contain any drivers. Its
functional use is to complete the horn formed by the bottom and the first active module.
The bottom module also provides a mounting solution for the optional side lights.
The following tables list each MOD model number with its specifications. Each speaker
array model must be ordered with a specific corresponding UV and Amplifier.
Wind load calculations are for speaker array only.
