Installing the MicroPulse™ SignalMaster™ with Brake Module
2
MicroPulse
™
SignalMaster
™
with Brake Module
An Overview of the MicroPulse SignalMaster
The Federal Signal MicroPulse SignalMaster is a directional light assembly for use in a flashing mode.
The lens colors available are amber (standard) and red.
The MicroPulse SignalMaster provides two distinctive directional signals: left arrow and right arrow.
In addition, an alternating flash pattern produces a warning signal for use when a directional signal
may not be appropriate.
When a directional signal is selected, the lamps are individually illuminated in a sequential sweeping
motion until all lamps are illuminated. The brake module, which operates independently from the
control module, is located at the center of the lightbar.
These lights are for secondary warning only. They are not for use as a primary warning system.
Failure to use these lights as intended may cause property damage, personal injury, or death.
Product Specifications
Input Voltage:
11 Vdc to 13.6 Vdc (12 V models)
Polarity:
Negative ground only
Dimensions:
Height:
2.6 in (6.6 cm)
Length:
51 in (129.5 cm) and 42 in (106.7 cm)
Depth:
3.4 in (8.6 cm)
Cable Length
15 ft (457.2 cm), 30 ft (914.4 cm), 60 ft (1828.8 cm)
Installing the MicroPulse SignalMaster Light Assembly
STATIC SENSITIVE DEVICE: The circuitry of the MicroPulse SignalMaster can be damaged or
destroyed by electrostatic discharge (ESD). To prevent ESD, observe anti-static procedures
during installation.
Install the light assembly as described in the instructions included with the mounting kit. Route the
cables to the planned location of the control unit.
