12
1. Configuring the Network Interface
Informer15 Speaker (Models I-IP15 and I-IP15X) Modbus Enabled
Federal Signal www.fedsig.com
7.
Reboot the device for the IP address change to take effect.
Configuring the User Setup
User Setup allows Full Admin privileged users to create users, passwords, and assign
security privileges.
You cannot delete the Admin user or change the security privilege for the Admin user.
You can change the Admin user’s username and password.
To create users and enable the factory support user, do the following:
1.
Select User Setup.
The User Setup page appears.
Fields
Description
Username
Enter the name of the user (case sensitive).
Password
Enter the user's password (case sensitive).
Password
Confirm
Enter the user's password again. The Password Confirm must match
the Password.
Privileges
In the Privilege list, select one of the following:
• Full Admin: has unrestricted access to all configuration screens
• View and Configuration: can configure all settings except User
Setup
• View Only: can only view the Home screen