Federal Signal Corporation I-IPTEL1 Скачать руководство пользователя

Страница: 24 / 24

Getting Service

IP Phone for Intelligent Systems (I-IPTEL1)

Federal Signal www.fedsig.com

Bluetooth

1. Press Menu > Basic > Bluetooth

2. Press the OK soft key to enter the Bluetooth open interface.
3. After opening, press the Scan soft key to display the list of

Bluetooth scanned. Select any device and press connect.

Wi-Fi

1.  Plug the Wi-Fi Dongle. Press Menu > Basic > WLAN.
2.  Press the OK soft key to enter the WLAN open interface.
3.  After opening, press the Scan soft key to display the list of

Wi-Fi scanned.

4. Press the Enter soft key to enter the available Network,

select the wireless network, press the Connect soft key and

enter the password to connect.

For additional application and configuration information, see

the IP Phone for Intelligent Systems User Manual (part number

25500824) located online at fedsig.com.

Getting Service

If you are experiencing any difficulties, contact Federal Signal

Customer Support at 800-548-7229 or 708-534-3400 extension

7511 or Technical Support at 800-524-3021 or 708-534-3400

extension 7329 or e-mail at [email protected]. For

instruction manuals and information on related products, visit

http://www.fedsig.com.

Содержание I-IPTEL1

























Результаты поиска

Содержание I-IPTEL1

Отзывы:

Похожие инструкции для I-IPTEL1

Бренды по названию

Популярные бренды

Federal Signal Corporation I-IPTEL1, Техническое описание, установка и настройка

Результаты поиска

Содержание I-IPTEL1

Отзывы:

Похожие инструкции для I-IPTEL1

Бренды по названию

Популярные бренды