Federal Signal Corporation G-SND-MV-D, Инструкция по установке и обслуживанию

Страница: 23 / 31

23
Installation and Maintenance Instructions
Model G-SND Global Series Sounder
220-240 Vac operation (no remote switching of tones)
a.
Connect the line (hot) power-source wire to the position
marked
L1/+
on the terminal block.
b.
Connect the neutral (common) power-source wire to the
position marked
L2/-
on the terminal block.
c.
Connect the ground wire to the position marked
Alt01
on the terminal block.
120 Vac operation (no remote switching of tones)
a. Connect the line (hot) power-source wire to the position
marked
L1/+
on the terminal block.
b. Connect the neutral (common) power-source wire to the
position marked
L2/-
on the terminal block.
c. Connect the ground wire to the position marked
Alt01
on the terminal block.
24 Vdc operation (no remote switching of tones)
a. Connect the positive (
+
) power-source wire to the
position marked
L1/+
on the terminal block.
b. Connect the negative (
–
) power-source wire to the
terminal block position marked
L2/-
on the terminal
block.
c.
Connect the ground wire to the position marked
Alt01
on the terminal block.
220-240 Vac operation (remote switching of tones)
a.
Connect the line (hot) power-source wire to the position
marked
L1/+
on the terminal block.
b. Connect the neutral (common) power-source wire to the
position marked
L2/-
on the terminal block.