6
FireRay
®
Scene Light
Federal Signal
www.fedsig.com
Installing the FireRay
Overview of the FireRay Scene Light
The FireRay Scene light is a self-contained, high intensity, LED
light designed for mounting to the exterior of a vehicle. FireRay
Scene Lights are designed for operation on 12 Vdc.
Unpacking the Product
After unpacking the light, inspect it for damage that may
have occurred in transit. If it has been damaged, file a claim
immediately with the carrier, stating the extent of damage.
Carefully check all envelopes, shipping labels, and tags before
removing or destroying them. If installing a permanent mounted
beacon, ensure that the parts listed in Table 2 are included in
the package.
Table 1 Kit Contents
Qty Description
Part No.
2
#8 x 1-inch Stainless Steel Screw
7011242-16
2
Plastic Screw Grommet
7065073
Installing the FireRay
AIRBAG DEPLOYMENT: Do not install equipment or route wiring
in the deployment path of an airbag. Failure to observe this
warning will reduce the effectiveness of the airbag or potentially
dislodge the equipment, causing serious injury or death.
NOTE:
For maximum coverage and effectiveness, mount the
light assembly in a horizontal orientation. See Figure 1.
Before proceeding with installation, determine the approximate
location of the light assembly and plan all cable/wire routing.
To install the FireRay:
1.
Position the Scene light assembly on the desired mounting
surface. Ensure that the unit is level side to side. See
Figure 1.
