Federal Signal Corporation EOWS-612 Скачать руководство пользователя страница 2

 

 

Limited Warranty

 

 

The Signal Division, Federal Signal Corporation, warrants each new product to be free from defects in 
material and workmanship, under normal use and service, for a period of two years (one year for 
Informer, EAS, and Federal software products) on parts replacement and one year on labor from the date 
of delivery to the first user-purchaser.  Federal Warning Systems warrants every 2001 Siren (Top of pole 
only) to be free from defects in material, per our standard warranty, under normal use and service for a 
period of Five years on parts replacement. 
 
During this warranty period, the obligation of Federal is limited to repairing or replacing, as Federal 
may elect, any part or parts of such product which after examination by Federal discloses to be defective 
in material and/or workmanship. 
 
Federal will provide warranty for any unit which is delivered, transported prepaid, to the Federal factory 
or designated authorized warranty service center for examination and such examination reveals a defect 
in material and/or workmanship. 
 
This warranty does not cover travel expenses, the cost of specialized equipment for gaining access to the 
product, or labor changes for removal and re-installation of the product. The Federal Signal Corporation 
warranty shall not apply to components or accessories that have a separate warranty by the original 
manufacturer, such as, but not limited to, batteries. 
 
This warranty does not extend to any unit which has been subjected to abuse, misuse, improper 
installation or which has been inadequately maintained, nor to units which have problems related to 
service or modification at any facility other than Federal factory or authorized warranty service centers. 

 
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT 
LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE.  IN NO EVENT SHALL FEDERAL BE LIABLE FOR ANY LOSS OF 
PROFITS OR ANY INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY SUCH 
DEFECT IN MATERIAL WORKMANSHIP

 
 
 
 
 

 

2645 Federal Signal Drive, University Park, IL 60466 

Phone: (800) 524-3021 Fax: (708) 534-4865 

Website:

 

http://www.federalwarningsystems.com

 

Содержание EOWS-612













Отзывы: