DTX Series Installation Instructions
3
Model DTX-UNI Rear Camera Universal Mount
Figure 2
DTX-UNI mounting flange
Ø 1.860"
Ø 1.920"
Ø 2.440"
Ø 0.220"
290A6587
Attaching the Camera to the DTX-UNI Universal Mount
To attach the rear camera to the universal mount:
Step 1:
Remove the standard mounting bracket from the Model DTX-RC camera by using the
Allen key to remove the six socket screws, lockwashers, and washers securing it to the
camera (Figure 1 on page 2).
Step 2:
Attach the camera (with the light shield, if required) to the DTX-UNI mounting bracket
with the mounting hardware removed in step 1: three screws, lockwashers, and
washers per side.
Step 3:
Re-attach the universal mount assembly to the flange and tighten the knob.
Step 4:
Pivot the camera to the selected viewpoint by loosening the knob and side arm locking
the gimbal joints. Tighten the knobs to ensure the assembly remains stable during
everyday use (Figure 1).
Step 5:
To aim the camera in the bracket, loosen the six socket screws, tilt the camera, then
tighten the screws.
Connecting the Camera Cable
To connect the camera to the DTX system:
Step 1:
Route and connect the 17-foot video cable of the DTX-RC camera to the black
connector of the DTX-CC peripherals cable from the DTX-2-DVR. Ensure that the
cables do not interfere with the operation of any equipment or hinder the activities of
the driver and passenger.
Step 2:
Test the connection to the DTX-2-DVR to ensure the camera cable connection is
working properly.
