background image

Installing the DFC-WC-DUR21 Push Bumper Wire Cover on the 2021+ Dodge

®

 Durango

®

3

DFC-WC-DUR21 Push Bumper Wire Cover 

Federal Signal www.fedsig.com

To install the DFC-WC-DUR21 Push Bumper Wire Cover:

1. 

Place the wire covers (Items 1 and 2) as shown in Figure 2. Note that the figure is of the driver-side wire 

cover (Item 1).

Figure 2 Wire cover placement (Driver side shown)

1

2. 

Install the supplied hardware as shown in Figure 3.

Figure 3 Install hardware

1

3

4

6

5

3. 

Tighten all hardware to 8 ft-lb.

Care Instructions

Regularly clean the textured powder coat finishes with either a soft cloth or a brush with mild soap and warm 

water. Avoid using any harsh chemicals, as this will damage the product's finish. Pressure washing this product 

is the most efficient way to remove heavy dirt and grime. The pressure washer should be used on a low-

pressure setting with filtered water for best results. Using high pressure can damage the product's finish. 

Отзывы: