4
Installation and Maintenance Instructions
Battery Powered Warning LED
Safety Messages to Installers and Users
Follow all instructions shipped with this product. This device
is to be installed by a trained electrician who is thoroughly
familiar with the National Electrical Code and will follow the
NEC Guidelines as well as local codes.
The selection of the mounting location for the device, its
controls and the routing of the wiring is to be accomplished
under the direction of the facilities engineer and the safety
engineer. In addition, listed below are some other important
safety instructions and precautions you should follow:
•
Read and understand all instructions before installing or
operating this equipment.
•
Do not stare directly into the LED at a close range or
permanent damage to your eyesight may occur.
• Test
the warning LED to ensure that it is operating properly.
•
After testing is complete, provide a copy of this instruction
booklet to all operating personnel.
•
Establish a procedure to routinely check the light system for
proper activation and operation
Failure to follow all safety precautions and instructions may
result in property damage, serious injury, or death.
Unpacking the Model BPL26L
After unpacking the product, examine it for damage that
may have occurred in transit. If the warning device has been
damaged, do not attempt to install or operate it. File a claim
immediately with the carrier, stating the extent of the damage.
Carefully check all envelopes, shipping labels, and tags before
removing or discarding them.
