Installation: Flat Surface (External Conduit) Mount
Model 400 Series Lights
8
2. Install an installer-supplied 1/2" conduit fitting into the hole.
3.
Insert the nylon grommet in the large center hole in the side
of main frame casting of the light assembly (Figure 2).
Figure 2 Grommet in 7/8" drilled hole in bracket
DIMPLES
TOP AND
BOTTOM
ADAPTER PLATE (1)
6-32 SCREWS HEX HD. SLF TAP (2)
COVER PLATE (1)
1/4-20 SCREWS HEX HD. (2)
10-32 SET SCREWS ALLEN HD. (2)
MOUNTING BRACKET (1)
(WALL/CEILING MTG.)
GROMMET
LEXAN DOME
HOUSING
MAIN MOUNTING FRAME
290B1506
CUSTOMER
SUPPLIED
MTG. SCREWS (4)
ANCHORS (4)
SUPPORTING WALL
1/2" CONNECTOR
1/2" CONDUIT
1/2" CONDULET
WIRE NUTS (2)
1/2" CONDUIT
POWER SUPPLY
(MAKE CONNECTIONS HERE)
4.
Attach the wall/ceiling mounting bracket to the main frame
casting using two 1/4"-20 x 1/2" hex-head machine screws.
Ensure that all wiring from the interior of the light passes
through the large center hole in the end of the bracket.
Route the wiring through the conduit fitting that was
installed in step 2.
