OPERATING INSTRUCTIONS
Using the Control Panel: (Locate in Figure 3)
✦
There are
9
adjustable heat levels, including
99
°F/
37
°C,
95
°F/
35
°C,
90
°F/
32
°C,
85
°F/2
9
°C,
80
°F/
27
°C,
75
°F/
24
°C, 70°F/21°C, 6
5
°F/
18
°C, 6
0
°F/
16
°C.
✦
When press the heater button and the ice blue circle on the digital display screen will be shown
and twinkling, press UP or DOWN button to adjust the levels.
✦
When the heater is on, once turn off the flame mode and the hearth mode simultaneously, the
ember is bright, the digital display screen will display the setting temperature.
✦
You can switch the temperature display from Fahrenheit to Celsius by pressing the Heater
button for approximately 5 seconds.
✦
Without any adjustment after approximately 15 seconds the digital display screen will be shown
is no display after
.
✦
When turn off the heater, the blower will still work 60 seconds.
✦
This feature can also be controlled with the Remote Control.
Ambience (Figure 3.D):
✦
The AMBIENCE button controls the ambience feature
.
✦
When the fireplace is first turned on, the default state is orange flickering ambience.
✦
There are 6 ambience effects you can cycle through, including Orange flickering, Blue, Violet,
Orange, Polar and Off
.
When you press this button continually, the digital display screen will
show corresponding letter as b, bb, bV, bO, bP or show current room temperature.
✦
When the ember is on blue, violet, or orange mode, press DOWN or UP button to adjust the
brightness, the digital display screen will show corresponding letter as b1 to b3.
✦
This feature can also be controlled with the Remote Control.
Hearth (Figure 3.E):
✦
The HEARTH button controls ember effect.
✦
There are
5
selections you can cycle through, including
flickering of Polar, Gules, Orange, and
Violet and
Off
. When you press this button continually, and flame is off and the digital display
screen will show corresponding letter as HP, HG, HO, HV or show current room temperature.
✦
After adjusting the ember mode, when turn on the flame, the flame color will follow the ember
color. The color of the flame and the ember will be restored as last setting.
✦
This feature can also be controlled with the Remote Control.
Timer (Figure 3.F):
✦
The TIMER button controls the TIMER feature ON and OFF.
✦
Press UP(G) or DOWN(F) button, you can set the turn off time from 0.5H to 8H with 0.5H
interval.
✦
Once the TIMER is on and the desired setting is reached, you may hear a long”BEEP” and the
system will shut down.
✦
This feature also can be controlled.
Flame speed (Figure 3.G):
✦
Once the flame is on, the FLAME SPEED button controls the flame speed feature.
✦
When the fireplace is first turned on, the default state is level
S3.
✦
There are 5 levels of the flame speed, when you press this button continually or press Up or
Down button, the digital display screen will show corresponding letter as S1 to S5.
✦
This feature can also be controlled with the Remote Control.
PAGE 5 OF 12
