PAGE 3 OF 10
OPERATING INSTRUCTIONS
The fireplace control functions can be accessed in two ways:
- Using the button control panel, located in the upper right-hand corner of the fireplace
- Using the multifunction remote control
The main control panel is located at the top right corner on the front (see Figure 2).
Read all instructions and warning prior to operating the appliance.
Ensure that all controls are in the
“OFF”
status before plugging the appliance into a properly grounded electrical
outlet.
This appliance is for use on 120 Volts. The appliance has a 3-prong grounded plug (Figure 1.A). If your electrical
outlet has only 2 slots (Figure 1.B), you will have to use an adapter (Figure 1.C) to convert from the 3-prong
power cord to a 2-slot receptacle. The green grounding plug extending from the adapter must be securely
connected to a permanent ground such as a properly grounded outlet box. The adapter should only be used if a
proper 3-slot receptacle is not available.
NOTE: Adapters are not allowed for use in Canada.
Figure 2
A 15 AMP circuit is required to operate this appliance. If the breaker trips when the appliance is running, you may
need to move the appliance to another location or unplug other appliances that are on the same circuit.
!
Figure 1
Button Panel
ITEM# 384-15A-20-33A
MODEL# 16IN-32-110
Display Screen
