Febco 825YD Series Скачать руководство пользователя страница 4

For additional information, visit our web site at: www.FEBCOonline.com

STEP 15:

Clean inside surfaces of the relief 

valve and push in the module 

assembly, being careful not to pinch 

the guide's O-ring. 

Note:

 The lower guide must align 

itself properly with the seat ring 

once all of the parts are assembled 

in the body for the relief valve to 

function properly. 

STEP 16:

Take the partially inverted dia-

phragm and place it over the spring 

button of the module. Take a blunt 

tool and carefully work the dia-

phragm in and around the button. 

Line up diaphragm bolt holes with 

body flange bolt holes. 

STEP 17:

Replace the cover and check for 

proper positioning. 

A Division of Watts Water Technologies, Inc. 

USA:  4381 N. Brawley • Ste. 102 • Fresno, CA • 93722 • Tel. (559) 441-5300 • Fax: (559) 441-5301 • www.FEBCOonline.com

Canada:  5435 North Service Rd. • Burlington, ONT.  • L7L 5H7 • Tel. (905) 332-4090 • Fax: (905) 332-7068 •  www.FEBCOonline.ca

IOM-F-RV  0845 

EDP#  1915982 

© FEBCO, 2008

Limited Warranty:

 FEBCO warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.  In the event 

of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.  

THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY GIVEN BY THE COMPANY WITH RESPECT TO THE PRODUCT.  THE COMPANY MAKES NO OTHER 

WARRANTIES, EXPRESS OR IMPLIED.  THE COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of warranty, and the Company shall not be responsible for any incidental, special 

or consequential damages, including without limitation, lost profits or the cost of repairing or replacing other property which is damaged if this product does not work properly, other costs resulting 

from labor charges, delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions, chemical, or any other circumstances over which the Company has no 

control.  This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or alteration of the product.  

Some States do not allow limitations on how long an implied warranty lasts, and some States do not allow the exclusion or limitation of incidental or consequential damages.  Therefore the above 

limitations may not apply to you.  This Limited Warranty gives you specific legal rights, and you may have other rights that vary from State to State.  You should consult applicable state laws to 

determine your rights.  

SO FAR AS IS CONSISTENT WITH APPLICABLE STATE LAW, ANY IMPLIED WARRANTIES THAT MAY NOT BE DISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL SHIPMENT.

Содержание 825YD Series

Страница 1: ...ghly clean main guide STEP 4 New inner diaphragm will come in kit with fabric side out and the bead ed flange positioned up as shown STEP 5 Position inner diaphragm over the main guide and drop into place with beaded flange fully engaging groove on main guide IOM F RV I N S T A L L A T I O N O P E R A T I O N M A I N T E N A N C E Relief Valve Assembly Instructions Series 825YD 826YD 860 880V Repa...

Страница 2: ... STEP 8 Turn guide diaphragm assem bly upside down and work disc holder into guide until flush with diaphragm STEP 9 Push the disc holder through the guide while holding the diaphragm flush against the end of the holder Continue until the holder stops on the guide Place the assembly on a flat surface with the diaphragm facing up This will ensure that excess rubber will roll to the inside of the ma...

Страница 3: ...r the screw head to protect the outer diaphragm STEP 12 Reassemble disc and lower the guide to the disc holder DO NOT ALLOW THE DISC HOLDER TO TURN OR TWIST DURING THIS OPERATION Clean lubricate and install main guide O ring Models 825YD and 826 YD use a Stainless Steel Lower Guide and a Disc Washer in place of the Plastic Lower Guide as shown STEP 13 Place new outer diaphragm upside down on a fla...

Страница 4: ...RESS OR IMPLIED THE COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of warranty and the Company shall not be responsible for any incidental spe...

Отзывы: