3 - A detailed look at your device
Il vostro Attuatore Smart Wi-Fi 9322
Connection terminals:
these are the terminals to which you connect the power supply, the
shutter motor and the traditional buttons. From left to right the terminal sequence is: 1)
Power supply neutral, 2) Power supply live, 3) Motor live direction 1, 4) Motor live direction 2,
5) Traditional button live direction 1, 6) Traditional button live direction 2.
Pairing button
: this button performs several functions. It is used to start the procedure for
connecting to the Wi-Fi network in your home, to start pairing with the wireless buttons and
to restore the device to its factory settings. It is also possible to directly control the actuator
by pressing this button to move the motor rst in one direction and then in the other.
LED indicators
: two indicators that provide feedback on the status of the device. In normal
operation, the LED indicates the status of the load: on when it is on and off when it is off, the
red LED for one direction of the motor and the green for the other. When the product is
started, the red LED ashes quickly, to indicate that the actuator is not yet connected to a Wi-
Fi network.
Antenna:
it is the antenna used to receive radio signals from the FEB Easy wireless buttons.