11
INSTALLING LARGE CROSSRIBS
•
Angle the crossrib towards the spacers on the keel,
chine, and gunwale tubes. Position the crossrib between
the spacers, pushing the rib onto the tube.
For the bow crossrib, there is a pin at the base of the
rib. Two black blocks are mounted on the keel bar. The
“twister” is mounted with one screw, and should be in
the open position. Insert the pin on the base of the
crossrib into stationary black block (with two rivets).
Close the “twister”.
Bow crossrib
Pin into block
Bow crossrib
Stern crossrib
Feathercraft
Wisper
13
pin
twist to close
block
2005Wisper_English.Layout 6/22/05 12:10 PM Page 13
