background image

Safety Instructions

Never drag furniture when moving it, always lift it. Please take care when handling or moving the furniture
as careless handling may cause damage or injury. No liability will be accepted for damage or injury caused
by incorrectly installed furniture.

Care and maintenance

Wood Furniture

Wood displays different grain patterns depending on which way it is cut - for example, the ‘medullary ray’
which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the nat-
ural beauty of the wood. Some furniture is also deliberately aged and rustic.

All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from
items that have been previously purchased.

How to care for your wood furniture

Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.

When using the surface for serving food and drinks it is best to use protective mats and coasters.
Spillages should be wiped up as soon as possible.

Spray polishes are best avoided as they contain silicones which may spoil the furniture’s surface by building
up over time. 

Use of cleaning materials containing abrasive compounds, acidic or caustic reagents and any

bleaches containing oxidising reagents should be avoided as prolonged use may damage the lacquer sur-
face.

Wipe up spills immediately. If sticky marks occur on the surface they can be removed with a dilute solution
of warm soapy water. 

The offending area should be rubbed lightly and then completely dried immediately

afterwards, before replacing any mats etc.

Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to
heat sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused
by central heating can cause damage such as warping.

ercol

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

Feather & Black, Terminus Road, Chichester.  West Sussex. P019 8ZZ  01243 380601

www.featherandblack.com

Содержание Ercol pimlico 2 door wardrobe 10PIM 2000










Отзывы: