FSC-DB200 User Guide
Shenzhen Feasycom Technology Co.,Ltd
4
8
Volume up
Short press to increase the volume/long press to select the next song
9
Volume down
Short press to decrease the volume/long press to select the previous song
10
ON/OFF
Long press to turn on/off and play music: short press to pause/play.
Incoming call: short press to answer the call, short press again to hang up
11
Arduino
board
extension pin
Arduino board extension pin, default empty
12
Arduino
Indicator
light
Arduino status indicator
13
Analog audio
Differential output
Extension pin, empty by default
14
External IPEX
Module external antenna connection base
15
Module
Support BT806/1006/1026X/958 etc.
16
Module pin
Module pin
17
TRBI200
TRBI200 burner interface, empty by default
18
Module reset button Short press to reset the module
19
Battery charging
Charge the battery under short-circuit condition, module upgrade/fixed
frequency
*
20
Module power supply Short circuit: Type-C to supply power to the module, disconnection: Type-C to
supply power to the module, or to charge the battery when Type-C has input
voltage and "battery charging/module upgrade pin" is short-circuited
*
21
SPI/I2S
Short circuit: SPI, disconnect: I2S to choose according to the function of the
module
22
Module
Indicator
light
The blue light flashes quickly when pairing is in progress, and the light keeps on
means it is connected. The green light is on, SPP/BLE connection is successful
Note: The three combinations marked * can be used to charge the battery, and the maximum current is 200mA.
In general, this function is turned off by default. Not all modules support battery charging.
Shenzhen
Feasycom
Technology
Co.,Ltd.
