10
Level 2 parameters
Alarm 1 setpoint (SET1) setup
Alarm 2 setpoint (SET2) setup
—————————————————————————————————————————————
$OORZV\RXWRFKDQJHWKHVHWSRLQWIRUWKHDODUPDQGWKHDODUP
<RXFDQVHWWKHDODUPVHWSRLQWLQWKHUDQJHEHWZHHQ
(range lower limit) and
(range upper limit).
Related parameters:
(page 12),
(page 12),
(page 13),
(page 13)
[Setting example] Changing the alarm 1 setpoint from 1200°C to 700°C ———————————
Press the key for 3 seconds.
appears.
Press the key once to save the change.
The display changes back to when the change is complete.
If you want to check the setpoint, repeat the steps 2 to 4.
Use the and keys to change to .
Display
Operating procedure
1.
4.
To go back to the operation mode (PV display), press the key for 3 seconds.
5.
2.
3.
PV
PV
Press the key once.
The setpoint ( ) is displayed.
PV
display
PV
display
SEL
SEL
SEL
SEL
