12
MSR128LUS/MSR128LUV USERS MANUAL EM-7375 Rev.2
4
SETTING UP THE MSR128LU
Select Setting button on the top control panel to show the Setting Menu (Figure 4.0).
Figure 4.0: Setting menu.
4.1
BASIC SETTING
Selections in the Setting Menu determine the system configuration for the MSR128LU. Most of these selections are
changeable only when the Record view is stopped. You can review the current setting while the program is running.
Figure 4.1: Basic setting.
4.1.1
OPERATING MODE
• Demo mode:
You can run the MSR128LU program without actual signal input when you choose the Demo
mode. In the Demo mode, the MSR128LU creates a sinusoidal (analog) waveform or square
(discrete) waveform for each pen. ‘DEMO’ appears on the background of the screen while the
MSR128LU is operating.
• Normal mode:
0.5-sec. or slower storing cycle is applicable in this mode. Service channel numbers are 120
at the maximum, using Group 1 through Group 10 views (12 channels/group).
