
Note:
The FDT camera use the wired Ethernet cable by default, it will work on the wireless status
automatically if you disconnect the Ethernet cable. But the wireless will not work if you still
connect the Ethernet cable in your camera.
3) DDNS
Here you can set the third-party DDNS like Dyndns.org/3322.org/dynddns.us/No-ip.com and the
status of the UPnP for your camera. You can get the public IP address of the LAN your camera
works by click the “Query” button.
4) ONVIF
Here you can set the control configurations about ONVIF, such as enable status, port and
privilege. You can configure these information as the needs of your NVR, so FDT camera can
match your NVR best.
43
FDT Technologies-
http://www.fdt.us