µ E Z
G U I U s e r ’ s M a n u a l
P a g e
|
18
9/13/2023
Copyright ©2023, Future Designs, Inc.
Revision 1.2
Pin Number
Description
1
Micro SD DAT2
2
Micro SD DAT3
3
Micro SD CMD
4
3.3V
5
Micro SD SCLK
6
Ground
7
Micro SD DAT0
8
Micro SD DAT1
9
Micro SD CD
10
Micro SD CD
11
Ground
12
Ground
WARNING: The microSD card must only be removed using the spring loaded “push
-
pull” mechanism on the microSD
socket. Improper forceful removal of the microSD card will result in permanent damage to the socket that is not
covered under warranty
. To insert the card, just push it into the socket until a “click” sound is heard.
Start with the microSD card in this position relative to
the microSD slot with the text and “lip” facing up.
Next gently insert the card partially into the socket.
Use your figure to gently push the card into the socket
until it clicks.
At this point the microSD card is fully inserted. It should not
fall out, even if the unit is shaken vigorously.
To remove the microSD card, press the card back into the socket until another “click” sound is heard, then release
pressure on the card. At this point, the card should be partially ejected from the socket. Finally grab the card and
gently pull to remove it. See the following pictures for proper micro-SD removal:
To remove the microSD card, gently push it into the
socket again until it “clicks”, and then release your figure.
At this point, the microSD card should partially stick out
of the socket.
