ΣYG
-
S7G2
-MDK
User’s Manual
4/5/2021
Copyright ©2021,
Future Designs, Inc
Page
8
of
26
1.5
Requirements
The ΣYG
-
S7G2
-MDK requires a carrier board with a 200-pin SO-DIMM socket. The
socket should have the key at the 1.8V location. The CARRIER Board from Future Designs
provides this socket and should be utilized to develop your application for initial verification.
Each
Σ
yG development kit includes:
•
ΣyG
-
S7G2 System on Module (SOM)
•
Renesas Synergy Software Platform
•
Carrier Board
•
5 VDC, 2.3A North American Power Supply
•
USB and Ethernet Cables
•
Segger ARM Cortex-M Mini-
JTAG debugger and cables
•
Optional LCD Carrier Board
•
Optional 4.3” or 7.0″ PCAP Touch Screen LCD
1.6
ΣyG
-
S7G2 SOM Power Requirements
The power requirement for the ΣYG
-
S7G2
-MDK is 5V DC Center Positive 2A Power Supply.
Getting Started
2.1
Setting up the Hardware
The SOMDIMM should be inserted into the DIMM Socket as shown below and then
locked into place by pushing down to the Carrier Board. Ensure the SOMDIMM is inserted
completely into the socket prior to locking. The socket utilized on the CARRIER Board is
rated for a minimum of 25 insertions.
