FDE SO-CONNECT PID, Руководство пользователя

Страница: 60 / 75

Partie VII – Entretien, maintenance, élimination, garantie
60
Cleaning and disinfection of the pump
Take the opportunity of a replacement of the SO
♥
FILL, for example, to clean the SO
♥
CONNECT PID pump. To do so, use a soft dry cloth to
clean the outside of the pump.
Disinfection of the SO
♥
CONNECT PID pump is to achieve as follows:
▪
Make sure that no SO
♥
FILL syringe is connected to the pump. If necessary, remove it.
▪
Clean coarse dirt with a damp cloth.
▪
Turn on the screen.
▪
Set up a new infusion with e 50 ml SO
♥
FILL syringe and a volume of 1 ml.
▪
Wait for the pusher to come into place.
▪
Once the pusher is in position, remove the battery.
▪
Disinfect the pusher, the pump housing, the battery compartment and its cover with a cloth moistened with Mikrozid AF or Puresept
AF.
▪
Wait until the disinfectant solution has dried completely before handling the SO
♥
CONNECT PID pump.
Warning
▪
Never clean your SO
♥
CONNECT PID pump during an infusion. Cleaning could lead to a manipulating error and cause serious
injury.
Precautions
▪
Do not use household or industrial cleaners, chemicals, solvents, bleach, scouring pads or sharp instruments to clean the
SO
♥
CONNECT PID pump.
▪
Never put your
SO
♥
CONNECT PID
pump in the dishwasher.
▪
Always remove the
SO
♥
FILL syringe
and remove the battery while cleaning.
▪
Take care not to press too hard on the screen of the
SO
♥
CONNECT PID
pump while cleaning it, so as to avoid damaging it.
▪
The SO
♥
CONNECT PID pump must not be sterilised.
▪
Do not use cleaning and disinfecting products other than those recommended in this support. Non-recommended products may
damage the pump.