FD TMS, Инструкция по установке и эксплуатации

Страница: 7 / 38

- 7 -
Protection Class IP65
Sensor Housing
Material
Stainless steel (316)
3.3 Mechanical Construction
3.3.1 Appearance
Fig. 1 Standard Insertion Flow Meter Fig. 2 Flanged Flow Meter
(Pipe size DN100-DN500) (Pipe size DN10-DN80)
Fig. 3 Hot-tapped Insertion Flow Meter
(Pipe size DN100-DN4000. Special requirements please contact us)
The insertion sensor of compact insertion flow meter should be inserted to axis of pipe, and the length of
the insertion sensor is decided by pipe size, please confirm the pipe size when ordering. If the insertion
sensor can’t be inserted to axis of pipe, the manufacturer will provide a calibration factor to achieve an
accurate measurement.