Operations
As the user’s hands enter below the beam’s effective range (5 – 15 cm), the beam is
reflected back into the sensor receiver and activates the solenoid valve allowing a single
soap application to flow from the dispenser.
Soap Volume Adjustment
No adjustments are required for most settings. Factory default soap volume is 1 ml with
switch setting at 1 ,2.
The factory setting should be satisfactory for most installations.
To adjust the volume:
1. Using a flat head screw driver remove the screw and lower the front box cover.
2. Using a phillips screw driver remove the two phillips screw & the washers that
are securing the soap cartridge. Ensure the both the rubber sopa & battery caps
are tightly secured onto the soap cartridge
3. Turn the cartridge upside down.
4. Adjust soap volume using the red dip switch dials for:
i. Two drops set switch to O, 2
ii. Four drops set switch to 1, N
iii. 8 drops drops set switch to O,N
