FCCID TEW-812DRU, Руководство пользователя

Страница: 43 / 90

42
Gateway, Primary DNS Server, and Secondary DNS Server. Your ISP provides you with all of
this information.
DHCP
A method of connection where the ISP assigns your IP address when your router requests one
from the ISP's server.
Host Name:
Some ISP's may check your computer's Host Name. The Host Name identifies
your system to the ISP's server.
PPPoE
Select this option if your ISP requires you to use a PPPoE (Point to Point Protocol over Ethernet)
connection. DSL providers typically use this option. This method of connection requires you to
enter a
Username
and
Password
(provided by your Internet Service Provider) to gain access
to the Internet.
Reconnect Mode:
Typically PPPoE connections are not always on. The router allows you to
set the reconnection mode. The settings are:
Always on:
A connection to the Internet is always maintained.
On demand:
A connection to the Internet is made as needed.
Manual:
You have to open up the Web-based management interface and click the Connect
button manually any time that you wish to connect to the Internet.
Maximum Idle Time:
Time interval the machine can be idle before the PPPoE connection is
disconnected. The Maximum Idle Time value is only used for the "On demand" and "Manual"
reconnect modes.
L2TP
L2TP (Layer Two Tunneling Protocol) uses a virtual private network to connect to your ISP. This
method of connection requires you to enter a Username and Password (provided by your
Internet Service Provider) to gain access to the Internet.
L2TP Server IP Address:
The ISP provides this parameter, if necessary. The value may be the
same as the Gateway IP Address.
Reconnect Mode:
Typically PPPoE connections are not always on. The router allows you to
set the reconnection mode. The settings are:
Always on:
A connection to the Internet is always maintained.
On demand:
A connection to the Internet is made as needed.
Manual:
You have to open up the Web-based management interface and click the Connect
button manually any time that you wish to connect to the Internet.
Maximum Idle Time:
Time interval the machine can be idle before the PPPoE connection is
disconnected. The Maximum Idle Time value is only used for the "On demand" and "Manual"
reconnect modes.
WAN Interface IP Type