Bluetooth Headphone
&
Dongle User Guide
4
EN
Pairing the Headset and Dongle
1
Press and hold the
TALK/PAIRING
button on the headset
and then
slide the power switch to power it on.
2
Power on the dongle and then press
the
PAIRING button
to start pairing.
3
Release the buttons when the LEDs
flash red and blue alternatively. (Now
they are in pairing mode.)
4
The LEDs flash blue once per second
when the devices are successfully
paired.
Note:
If the pairing fails, power off both the devices and
repeat steps 1~2 until the pairing succeeds.
•
Connect the split ends of the supplied
AC adapter
(5V/0.5A)
to the DC-IN
jacks of the headset and the dongle.
Connect the other end to a wall outlet.
•
The LED indicator will light
RED
when
charging.
•
The LED indicator will
TURN OFF
when
batteries are fully charged.
Charging
To Power Outlet
Low battery
When the battery is low, the LED indicator
will
flash red
. Please charge the battery
for approximately
3
hours.
Note:
Do not use the headset or dongle while charging,
and do not connect the AC Adapter while the
headset or dongle is in use.
Please charge the built-in battery for
5
hours
before initial use.
Slide the power switch to power on/off the
headset and dongle. The LED indicator
flashes blue when the power is
ON
.
Power on/off
Preparation
