BTS-17 BM3251_20140808 V1.0
4
The
“Charge LED (2)”
Indicator will turn Off when the rechargeable
battery is fully charged.
Disconnect the USB cable when it is done.
D.
Power ON and Pairing
1.
Press and hold the
“ (1)”
button to turn On the device. A series of
tones will sound, followed by voice announce
“It is pairing waiting
for device connecting”
from speaker. And the
“Bluetooth LED (3)”
indicator is fast blinking in Blue.
2.
Then activate the Bluetooth function in your mobile device (such as
Mobile Phone or Personal Computer), the device will enter to
Bluetooth searching mode automatically, if not, tap the relate
selection to manually enter to searching mode. (refer to your device’s
manual when necessary)
3.
Your mobile device should show
“BTS-17”
in list, and then select it for
pairing. Waiting for some seconds and you will see connected
message as shown on your mobile device. (For some Bluetooth
devices, you may need to input
“0000”
as pairing password)
4.
If pairing is successful, voices announce
“paired”
from speakers, and
the
“Bluetooth LED (3)”
indicator will slow blinking each 3 ~ 4
seconds once.
5.
Now, you can start to music play from the mobile device by it music
player program.
6.
Press and hold the
“ (1)”
button to turn Off the device when it is
not in use.
Note:
the device will turn Off automatically in about 8 minutes when
there have not Bluetooth connected phone at placed.
E.
Disconnect from paired device
1.
Press and hold the
“ (7)”
button to switch to new
“Searching /
Pairing”
mode, the paired device will disconnect.
2.
Or, you can choose
“Disconnect”
from Bluetooth paired device list on
your mobile device.
3.
In this case; the Bluetooth Speaker will turn back into
“Searching /
Pairing”
mode in seconds, a series of tones will sound and the
“Bluetooth LED (3)”
indicator will fast blinking in Blue from slow.
4.
Now, you can process for new mobile device pair or power Off the
Bluetooth Speaker as you wanted.
F.
Auto re-connect with paired device and New pairing
1.
Every time you turn On the Bluetooth speaker power; it will firstly
searching for the mobile device, which has been paired previously
