11
Gas Leak Testing
WARNING
ALL JOINTS AND CONNECTIONS MUST NOW BE LEAK TESTED
BEFORE USING THE FIREPLACE.
LEAK TEST SHOULD BE PERFORMED ANNUALLY, AND WHENEVER THE GAS BOTTLE IS
REMOVED OR REPLACED.
ALWAYS PERFORM A LEAK TEST IN A WELL-VENTILATED AREA.
8
IF THERE ARE STILL GAS LEAKS AFTER REPEATED ATTEMPTS, CONTACT YOUR DEALER.
7
IF BUBBLES APPEAR, SWITCH OFF THE GAS SUPPLY AND REPAIR THE
PROBLEM. PERFORM A NEW LEAK TEST. DO NOT USE THE BBQ BEFORE YOU
ARE SURE THAT THERE ARE NO LEAKS.
6
OPEN THE GAS TAP ON THE REGULATOR AND CAREFULLY CHECK FOR BUBBLES
APPEARING ANYWHERE THE LIQUID HAS BEEN APPLIED.
1
MAKE A MIXED SOLUTION ( WATER AND LIQUID
DETERGENT / SOAP).
2
ENSURE THAT THERE ARE NO NAKED FLAMES, HEAT
SOURCES AND CIGARETTES IN THE VICINITY WHEN
PERFORMING A LEAK TEST.
3
CHECK THAT THE CONTROL KNOB ON THE FIREPLACE
ARE IN THE ”OFF” POSITION.
4
SET THE REGULATOR TO THE ”OFF” POSITION AND CONNECT IT TO THE GAS BOTTLE.
5
APPLY THE LIQUID TO ALL JOINTS AND CONNECTIONS ON THE GAS BOTTLE, REGULATOR,
THE ENTIRE HOSE AND ALL VALVES ON THE BBQ.
!
WARNING!
NEVER USE AN OPEN
FLAME TO PERFORM
A GAS LEAK TEST
