Assembly
11.
Place the grilling net (7) in the left grilling net (6) on the right grilling net
(5) on the furnace body as shown in the figure
.
12.
Place the oil tank (20) flat under the furnace
.
13
Step 10:
按图示用
C.D.F
将上盖把手（
1
）和把手隔热垫（
2
）固定在上盖上
Step 11:
按图示将左烤网（
6
）中烤网（
7
）右烤网（
5
）平放在炉体上
14
Step 12:
将接油盒（
20
）平放在炉体下面
.
Connecting Gas Cylinder
1. ALWAYS place the propane cylinder on the tank
holder under the cart.
2. ALWAYS confirm that all burner control knobs
are in OFF position before activating the gas
supply.
3. Before connection, be sure that there is no
debris caught in the head of the gas cylinder,
head of the regulator valve, or in the head of the
burner and burner ports.
4. ALWAYS connect the gas supply regulators as
follows: Insert the nipple of the valve coupling
into the tank valve and tighten the connection
collar by turning it clockwise with one hand
while holding the regulator with the other hand.
5. Disconnect the propane cylinder from the
regulator valve when the grill is not in use.
6. DO NOT obstruct the flow of combustion air
and ventilation air to the grill.
7. Keep ventilation openings of the cylinder
enclosure free and clear from debris.
To prevent fire or explosion hazard
when testing for a leak:
1. ALWAYS perform the 'leak test'
before lighting the grill and each time
the cylinder is connected for use.
2. DO NOT smoke or allow other
sources of ignition in the area while
conducting a leak test.
3. Conduct the leak test outdoors in a
well-ventilated area.
4. DO NOT use matches, lighters or a
flame to check for leaks.
5. DO NOT use grill until all leaks have
been stopped. If you are unable to
stop a leak, disconnect the propane
supply, call for gas appliance service
or your local propane gas supplier
DANGER
11.
12.
NOTE!
The pattern on the grill
surface may vary and does not
necessarily match the drawings.
13
fccbbq.com
