FCC BBQ Signature Combo FCC-G-18045-21, Инструкция по эксплуатации

Страница: 15 / 30

Gas Leak Testing
15
WARNING
ALL JOINTS AND CONNECTIONS MUST NOW BE LEAK TESTED BEFORE USING THE BBQ.
LEAK TEST ANNUALLY, AND WHENEVER THE GAS BOTTLE IS REMOVED OR REPLACED.
ALWAYS PERFORM A LEAK TEST IN A WELL-VENTILATED AREA.
8
IF THERE ARE STILL GAS LEAKS AFTER REPEATED ATTEMPTS, CONTACT YOUR DEALER.
7
IF BUBBLES APPEAR, SWITCH OFF THE GAS SUPPLY AND REPAIR THE
PROBLEM. PERFORM A NEW LEAK TEST. DO NOT USE THE BBQ BEFORE YOU
ARE SURE THAT THERE ARE NO LEAKS.
6
OPEN THE GAS TAP ON THE REGULATOR AND CAREFULLY CHECK FOR BUBBLES
APPEARING ANYWHERE THE LIQUID HAS BEEN APPLIED.
1
MAKE A MIXED SOLUTION ( WATER AND LIQUID
DETERGENT / SOAP).
2
ENSURE THAT THERE ARE NO NAKED FLAMES, HEAT
SOURCES AND CIGARETTES IN THE VICINITY WHEN
PERFORMING A LEAK TEST.
3
CHECK THAT THE CONTROL KNOB ON THE BBQ ARE
IN THE ”OFF” POSITION.
4
SET THE REGULATOR TO THE ”OFF” POSITION AND CONNECT IT TO THE GAS BOTTLE.
5
APPLY THE LIQUID TO ALL JOINTS AND CONNECTIONS ON THE GAS BOTTLE, REGULATOR,
THE ENTIRE HOSE AND ALL VALVES ON THE BBQ.
!
WARNING!
NEVER USE AN OPEN
FLAME TO PERFORM
A GAS LEAK TEST

Connect the gas hose to the gas rail inlet on the left
hand side of the barbecue. Do not overtighten.

Do not use any sealing tape, paste
or liquid on the connection.

Connect the regulator to the gas bottle according to
your regulator and bottle dealer’s instructions.

Gas hoses used for this product must not exceed 150
cm in length.

Confirm all barbecue control knobs are in the OFF
position.

We recommend propane gas for use in the Nordic
Region, but butane can also be used.Butane is not
very suitable for low temperatures.

Fit the regulator and the hose.
Follow the assembly instructions supplied with the
regulator set

Check the gas hose regularly for cracks, damage and
decay. Never use a damaged gas hose.

Check that the movable plastic collar on the
regulator is intact and that it has not been damaged
by hot BBQ parts.

Check that the gas bottle stands on a firm, flat
surface and is lower than the connector.

Use an approved gas bottle that fits the regulator
supplied.
CONNECTING GAS