Follow these instructions carefully to avoid
serious damage your barbecue and causing injury
to yourself and to property.
1. Assemble the barbecue following the assembly instructions carefully.
2. Connect the gas hose to the barbecue. Connect the regulator to the
hose. (Regulator and hose are sold separately)
3. Connect the regulator to the cylinder valve following the regulator
instructions supplied with the regulator.
4. Turn all of the control knobs to the ”OFF” position before turning on
the gas supply to the appliance.
5. Operate the regulator in accordance with the instructions supplied
with the regulator.
Use only regulators and hose approved for LPG at the above
pressures (See “TECHNICAL INFORMATION”). The life
expectancy of the regulator is estimated as 10 years. It is
recommended that the regulator is changed within 10 years of
the date of manufacture.
The use of the wrong regulator or hose is unsafe; always check
that you have the correct items before operating the barbecue.
The hose used must conform to the relevant standard for
the country of use. The length of the hose must be 1.5 meters
(maximum). Worn or damaged hose must be replaced. Ensure
that the hose is not obstructed, kinked, or in contact with any
part of the barbecue other than at its connection.
The hose should not be twisted or kinked when attached to
the gas cylinder. No part of the hose should touch any part of
the appliance. So site the cylinder out to the left hand side of
the appliance at the maximum distant permitted by the hose
length.
Change the flexible tube when the national conditions require
it, and/or depending on its validity.
Assembly
10