1.
Fix the motor bracket (13) to the sidewall of the
grill body with M6 nut, washer and screw. Use the
motorbracket that fits your barbecue.
2.
Enter the AC motor (17) on the bracket by sliding
the track on the motor onto the bracket from above.
3.
Thread the meat forks (11) on the spit (12) and
tighten in desired position. The spit (12) is then
inserted into the square hole on the AC motor(17).
4.
Enter the handle (1) on the extension (9), then
the balance block (2) and put on the roller (3) . The
rods are assembled using the rod sockets (10).
5.
The food should be centered when put on the
on the rod for roasting. Tighten the screw on the
meat forks when they are pushed into the food
and positioned in the middle of the rod.
6.
For smaller food or bigger barbecues, the
spit rod (12) can be used with the spit rod
support
(7 & 8). Do NOT assemble the handle (1)
when the end of the rod end up inside the barbecue.
NOTE!
Remove the grills warming rack when mounting the rotisserie kit.
Also remove the grilling grid if necesarry to allow enough space for rotation.
Assembly
3
