FCAR Product Manual
21
V1.1
3.2.2 Host and VCI Box connection
After the VCI box is connected to the vehicle, the connection between the
host and the VCI box needs to be matched, and then the vehicle diagnosis can be
performed after the matching is completed; the VCI box supports two ways of
communicating with the F7S host: Bluetooth pairing and USB cable.
Paired through Bluetooth
1)
Turn on F7S host power supply;
2)
Select [VCI Connection] in the main menu; select [Bluetooth] in the
connection mode;
3)
Click the Scan icon
on the right side of the device to automatically scan
Bluetooth devices nearby.
4)
Select target Bluetooth to match;
5)
When the matching is completed, state of VCI icon in the upper right corner
of the screen changes from "
" to "
", indicating that the
Bluetooth pairing is successful and the vehicle diagnosis can be started.
Note: If Bluetooth device can't be searched, it is maybe because the signal
