
IN CASE OF EMERGENCY
331
P
REPARATIONS
F
OR
J
ACKING
1. Park the vehicle on a firm, level surface as far
from the edge of the roadway as possible.
Avoid icy or slippery areas.
2. Turn on the Hazard Warning Flashers.
3. Apply the parking brake.
4. Place the gear selector into PARK (P).
5. Turn OFF the ignition.
6. Block both the front and rear of the wheel
diagonally opposite the jacking position. For
example, if changing the driver’s front tire,
block the passenger’s rear wheel.
Wheel Blocked
NOTE:
Passengers should not remain in the vehicle when
the vehicle is being raised or lifted.
J
ACK
A
ND
T
OOLS
L
OCATION
The scissor-type jack and tire changing tools are
located in the rear cargo area, under the loadfloor.
1. Lift up on the loadfloor handle to access the
jack and tool storage.
Loadfloor Handle
2. Remove the jack storage cover to access the
jack and tools.
Jack And Tools Access Cover
WARNING!
Do not attempt to change a tire on the side of
the vehicle close to moving traffic. Pull far
enough off the road to avoid being hit when
operating the jack or changing the wheel.
7
22_WS_OM_EN_USC_t.book Page 331
Содержание GRAND WAGONEER 2022
Страница 107: ...105 GETTING TO KNOW YOUR INSTRUMENT PANEL BASE INSTRUMENTCLUSTER 3 22_WS_OM_EN_USC_t book Page 105 ...
Страница 109: ...GETTING TO KNOW YOUR INSTRUMENT PANEL 107 PREMIUM INSTRUMENT CLUSTER 3 22_WS_OM_EN_USC_t book Page 107 ...
Страница 395: ...SERVICING AND MAINTENANCE 393 8 22_WS_OM_EN_USC_t book Page 393 ...