STARTING AND OPERATING
105
C
RUISE
C
ONTROL
— I
F
E
QUIPPED
When engaged, the Cruise Control takes over
accelerator operations at speeds greater than
25 mph (40 km/h) or 20 mph (32 km/h),
depending on engine size and axle ratio.
The Cruise Control buttons are located on the
right side of the steering wheel.
Cruise Control Buttons
NOTE:
Do not place the gear selector in NEUTRAL
when Cruise Control is activated. Doing so
will disengage the system.
In order to ensure proper operation, the
Cruise Control system has been designed to
shut down if multiple speed control functions
are operated at the same time. If this occurs,
the Cruise Control system can be reactivated
by pushing the Cruise Control on/off button
and resetting the desired vehicle set speed.
To Activate
Push the on/off button to activate the Cruise
Control. “CRUISE CONTROL READY” will appear
in the instrument cluster display to indicate the
Cruise Control is on. To turn the system off,
push the on/off button a second time. “CRUISE
CONTROL OFF” will appear in the instrument
cluster display to indicate the Cruise Control is
off. The system should be turned off when not in
use.
To Set A Desired Speed
Turn the Cruise Control on. When the vehicle
has reached the desired speed, push and
release the SET (+) or SET (-) button. Release
the accelerator and the vehicle will operate at
the selected speed. Once a speed has been set,
a message “CRUISE CONTROL SET TO MPH
(km/h)” will appear indicating the set speed. A
cruise indicator lamp, along with set speed will
also appear and stay on in the instrument
cluster when the speed is set.
To Vary The Speed Setting
To Increase Or Decrease The Set Speed
When the Cruise Control is set, you can increase
speed by pushing the SET (+) button, or
decrease speed by pushing the SET (-) button.
1 — On/Off
2 — CANC/Cancel
3 — SET (+)/Accel
4 — RES/Resume
5 — SET (-)/Decel
WARNING!
Leaving the Cruise Control system on when
not in use is dangerous. You could
accidentally set the system or cause it to go
faster than you want. You could lose control
and have an accident. Always ensure the
system is off when you are not using it.
4
21_LD_OM_EN_USC_t.book Page 105