FBT PSR 215 Premium Sound Reinforcement Series Speaker
Applications
•
Live Sound Reinforcement, Fixed Installations,
Touring Systems, Discos, Clubs, Auditoriums,
Theatres, Houses of Worship, Mobile DJ
Features
•
13 ply Trapezoidal Baltic Birch plywood construction cabinet,
Internally braced to eliminate cabinet vibrations
•
Tour Grade scratch resistant black paint finish
•
Integral ergonomic carrying handles for easy transportability
•
1 3/8” Speaker Stand Socket
•
Six M - 10 fly points
•
High SPL capability: 131 dB
•
800 w RMS, 1600 w Program @ full range operation
•
Switchable internal crossover for full range or bi amp operation
Product Description
The FBT PSR 215 Speaker features 13 ply Baltic Birch plywood construction cabinetry in a trapezoidal design, internally
braced to prevent undesirable cabinet vibrations. A rugged touring grade scratch resistant black paint finish protects the
cabinet exterior.
A heavy duty perforated steel grille provides protection for the woofer and horn. Strategically placed integrated carrying
handles built into the cabinet lend to easy transportability. Six ATM manufactured M-10 fly points are provided allowing
single speaker or multiple speaker cluster suspension. A 1 3/8” Speaker stand cup is built into the bottom of the cabinet for
placement on a speaker stand.
The FBT PSR 215 is of two-way bass reflex design incorporating a Italian manufactured 15” FBT proprietary low frequency
woofer with a 4” voice coil with aluminum windings and a 3” B&C titanium compression driver coupled to a B&C Aluminum
60° x 40° horn with a 2” exit. The internal crossover is constructed with a military grade dual flooded fiberglass circuit board
utilizing military spec components including metallized polyester condensers, and large diameter choke coils. All crossover
components are embedded in a special resin to ensure total imperviousness to vibrations in operation and shock
transmitted by mechanical impacts when transporting. The internal crossover allows either full range or bi amplified
operation by means of a jumper located internally on the crossover unit on the underside of the rear control panel input
plate. This type of selectable crossover frequency design provides against accidental crossover settings when either full
range or bi amplified operation is desired. When used in full range operation, the internal crossover frequency is preset at
1.3khz (24dBoct). Recommended amplifier power output when used in full range operation is 800w RMS total and 800 w
RMS LF, 160 w RMS HF when operated in bi amp mode. A sensitivity factor of 99dB applies in full range mode and 99 dB
LF, 108 dB HF in bi amp mode. Frequency response is an ample 45Hz -18kHz.
The rear facing input panel provides 2 Neutrik® Speakon NL-4 female connectors. FBT’s S.T.E.P® protection circuitry
ensures correct speaker operation even in overdriven conditions.
Specifications
System Type: 2 way
Dispersion: 60° H x 40° V
Components: 15” proprietary woofer, 3” B&C HF driver
Protection: FBT ESTP® Protection circuitry
Frequency Response: 45Hz - 18kHz
Inputs/Outputs: 2- Neutrik® Speakon
Nominal Impedance: 8 ohms
Suspension Points: 6 - M-10
Power Handling: 800w RMS, 1600w Program (full range)
Enclosure Material: 13 ply Baltic Birch plywood
Sensitivity: 99 dB @ 1 watt, 1 meter (full range)
Dimensions: 19”w x 30” h x 19” d
Maximum
SPL:
131dB
(full
range)
Net
Weight:
102
lbs.
Internal
Crossover
Frequency:
1.3
kHz
Shipping
Weight:
112
lbs.
