– 3 –
Quick Reference
System Turn On
Check to make sure the system is ready — Green READY LED is lit.
Enter your 4-digit User Code (or press the ARM button on your keyfob).
The ARMED LED goes on.
Exit through a door designated by your installer as an exit/entry door.
System Turn Off
Enter through door designated by your installer as an exit/entry door.
Enter your 4-digit User Code (or press the DISARM button on your
keyfob).
The ARMED LED goes out.
System Turn On/Stay Inside
Check to make sure the system is ready — Green READY LED is lit.
Press
STAY
followed by your User Code.
The ARMED and STAY LEDs light.
You must turn the system off if you want to open the door or leave the
premises after the exit time has passed.
System Turn On/Stay Inside/Instant Mode
Check to make sure the system is ready — Green READY LED is lit.
Press
INSTANT
then
STAY
followed by your User Code.
The ARMED, INSTANT, and STAY LEDs are all lit.
Smoke Detector Reset
Enter your 4-digit User Code.
