manualshive.com logo in svg

FBD 37 Series, Руководство по установке и эксплуатации

Поделиться
Скачать
FBD 37 Series Скачать руководство пользователя страница 21

37X INSTALLATION & OPERATION MANUAL

372/373 MODEL

20

10.  MENUS AND NAVIGATION

 

10.1  Keypad

 

The keypad is the user interface point and allows for control of the dispenser and navigation of the menus.  Please review 

the keypad layout (

Figure 10.1

) to familiarize yourself with the interface.

• 

Select Button (green):  This button confirms the current selection or action.

• 

Stop All Button (red):  This button will turn off all barrels.  A confirmation by the green select button is required.

• 

Up/Down Arrow Buttons (yellow):  These buttons move the highlighted selection up and down.  Press the select 

button to confirm the selection.

• 

Soft Key (screen-labeled) Buttons (black):  These buttons change function depending on the menu currently 

being displayed.  The function will be displayed below the top buttons and above the lower buttons.

Figure 10.1  Keypad

ICON ACTION

Returns the display to the home menu.

Returns the display to the previous menu.

Moves the highlighted selection to the column on the right.

Moves the highlighted selection to the column on the left.

Screen Icon Legend

Содержание 37 Series




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды