FAZUA RIDE 50 TRAIL Скачать руководство пользователя страница 26

Страница: 26 / 68

English | Original instructions

4.6 Charging the BATTERY

You can either leave the BATTERY in the DRIVEPACK during

charging or remove it from the DRIVEPACK and charge it sepa-

rately.

1. Before charging the BATTERY, prepare the CHARGER by connecting the mains

cable to the mains adapter.

More detailed information can be found

→

in chapter 30.1 “Preparing the CHARGER”.

2. Remove the DRIVEPACK from your e-bike.

More detailed information can be found

→

in chapter 16.2 “Removing the DRIVEPACK from the

e-bike”.

3. Insert the charging plug into the charging socket on the BATTERY.

More detailed information can be found

→

in chapter 30.2 “Connecting the CHARGER to the

BATTERY”.

4. Plug the power plug into a suitable wall outlet to establish the power connec-

tion.
The charging process starts automatically once the charger has been

connected to the mains.

More detailed information can be found

→

in chapter 27.8 “Charging process”.

5. Disconnect the CHARGER from the mains by unplugging the mains plug from the

socket when charging is complete or to interrupt charging.

6. Disconnect the CHARGER from the BATTERY by removing the charging plug from

the charging socket on the BATTERY.

More detailed information can be found

→

in chapter 30.3 “Disconnecting the CHARGER from

the BATTERY”.

Содержание RIDE 50 TRAIL




































































Результаты поиска

Содержание RIDE 50 TRAIL

Отзывы:

Похожие инструкции для RIDE 50 TRAIL

Бренды по названию

Популярные бренды

FAZUA RIDE 50 TRAIL, Оригинальное руководство пользователя

Результаты поиска

Содержание RIDE 50 TRAIL

Отзывы:

Похожие инструкции для RIDE 50 TRAIL

Бренды по названию

Популярные бренды