FAZUA RIDE 50 STREET Скачать руководство пользователя страница 28

Страница: 28 / 68

English | Original instructions

OPTIONAL ACCESSORIES

6.1 12 V Car Charger

The 12 V Car Charger is an original accessory for the FAZUA RIDE 50 drive system.
The 12 V Car Charger serves as a mobile charger for the BATTERY. For the power

supply, connect the 12 V Car Charger correctly to a 12 V electricity supply (e.g. in

a vehicle).

→

If you have any questions on the optional 12 V Car Charger, please contact

a FAZUA certified partner or visit the official FAZUA service platform

(https://fazua.com/de/support).

→

When using the 12 V Car Charger, observe the separate original operating

instructions for the 12 V Car Charger.

6.2 Downtube Cover

NOTICE

Danger of damage!

Components of the drive system may be damaged if you use the

e-bike or bicycle without the DRIVEPACK inserted and the opening for

the DRIVEPACK on the downtube of the frame remains unlocked.

►

If using the e-bike as a conventional bike without the DRIVEPACK,

close the DRIVEPACK opening on the downtube of the frame using

the optional downtube cover.

You can easily use your e-bike as a conventional bike without an electric drive

system by removing the DRIVEPACK.
Using the optional downtube cover, you can cover the free opening on the down-

tube after removing the DRIVEPACK. The remaining interior space can be used as

storage space for repair kit, tools or food.

→

If you have any questions on the optional downtube cover and its model vari-

ants, please contact a FAZUA certified partner or visit the official FAZUA service

platform (https://fazua.com/de/support).

Содержание RIDE 50 STREET




































































Результаты поиска

Содержание RIDE 50 STREET

Отзывы:

Похожие инструкции для RIDE 50 STREET

Бренды по названию

Популярные бренды

FAZUA RIDE 50 STREET, Оригинальное руководство пользователя

Результаты поиска

Содержание RIDE 50 STREET

Отзывы:

Похожие инструкции для RIDE 50 STREET

Бренды по названию

Популярные бренды